BLITZ SBC Type-S & R - Manual (Page 14)

－ Operation Method ④ －
■Set for scramble
１．Use ▼▲ to select when“S”shows, then press
button.
２．Use ▼▲ to select“DUTY”on the scramble time, then
press button.(0～100）
（SET on, S brinks and DUTY brinks）
３．Use ▼▲ to select“GAIN”on the scramble time, then
press button.(0～100）
（SET on, S brinks and GAIN brinks）
４．Use ▼▲ to select“P-GAIN”on the scramble time, then
press button.（0～100）
（SET on, S brinks and P-GAIN brinks）
５. Use ▼▲ to select“scramble time”, then press
（OFF～99 seconds）
６．After SET display is out, boost display will be shown.
※Scramble can only choose one on LO/HI
＜How to start Scramble?＞
Hold ▲ for 2 seconds to start.
Scramble will not start during peak is displayed or setting.
Wireless remote switch (sells as optional) can be used.
１３