BLITZ SBC Type-S & R - Manual (Page 5)

Ignoring these indications may cause injuries or minor injuries to the individual and
to a third party. It may cause malfunctions and breakages to the product.
注意 注意
・Ask for a professional or technician to perform the installation of this product.
The individual performing this installation must have technical skills and knowledge to perform
this installation.
・Do NOT drop or insert extreme force to the product while installing.
It would cause malfunctions.
・Do NOT heat the LCD screen over 60 degrees Celsius for a long period.
It would cause the LCD screen to go black.
・Do NOT misuse, abuse, alter, take apart and modify this product in any way.
It would cause an accident, fire, electrocution and breakage and burn the electronic parts. If any
of the above indications are executed, the warranty of the product will be voided.
・Do NOT install this product at a location where it could get wet and highly heated.
It would cause an electrocution, fire, breakage and burns to the electronic components.
・Do NOT install this product while the engine and its components are hot. Wait until they are fully
cooled
It would cause burn to you or to a third party if the engine, radiator and the exhaust system were
still hot.
・Please perform regular maintenance and be extra cautions.
This product's durability and components are thoroughly tested, however, depending on the vehicle's
driven condition and climate, the durability may decrease.
・Do NOT throw away the original detached components from the vehicle. Please keep the components
securely.
We are NOT liable from any damages caused to the components while installing it.
・Use the right tools to tighten the nuts and bolts.
It will damage the threads if you over tighten it or by using the wrong tools.
・This product has been designed and tested on vehicles with manufacturer's original components.
It would cause malfunctions to the product or vehicle if you have already installed not genuine products.
・About the LCD screen.
The LCD screen may seem dark or distorted if seen through polarized sunglasses.
・Be careful when selecting the type turbo exhaust gas bypass.
There are actuator types and waste gate types. If the select has mistaken, it may lead to breakage of
the turbo, engine and the vehicle itself.
・Do NOT over boost.
Blitz Co., Ltd. will not be responsible of any breakages to the turbo caused by over boosting.
・Do NOT operate the boost setups while driving on a public road.
The distraction from the operation may cause an accident.
・Ask for a professional or a technician if there's any strange sound, vibration and smell while driving.
警告 警告
Ignoring these indications may cause serious injuries or injuries to the individual
and to a third party.
－ Safety Notice －
４