BLITZ SBC Type-S & R - Manual (Page 15)

－ Oparation Method ⑤ －
■Set for Remote Control
Opt 15042 Wireless Remote Switch as optinal can be used to control
some functions of the SBC.
１．Use ▼▲ to select“R”.“R”should flash, then
press to set.
２．Use ▼▲ to select“CH”or“SC”.
If CH is selected, the Optional Remote can select
between LO or HI.
If SC is selected, the Optional Remote can activate
SCRAMBLE mode.
３． Press then boost level will be displayed.
Connecting the Optional Wireless Remote Switch
1. Confirm the power to the SBC unit is OFF before beginning connection.
Permanent damage to the SBC could result if the power is not off on the SBC
while the receiver is being connected
2. Connect the receiver to the SBC unit.
3. Confirm operation of the Wireless Remote Switch by following step 6 on page 15.
＜Image of Receiver setting＞
１４