Caron 7000-75 - Manual (Page 37)

7000-50 & 7000-75 Series Operations Manual Rev A 1/6/2014 Page 37 of 71
3. Lift the chart from the hub and locating pin and slide it from under the pens to
remove it from the chart plate.
4. Slip the new chart under the pen lifter, pens and time index; and press the chart into
place over the chart hub and locating pin.
5. Grasp the chart hub and locating pin and turn the chart until the desired time line on
the chart is aligned with the time index on the chart plate and Pen #1. Push down the
lifter to return the pens to the chart.
6. Close the door and apply power.