CounterPath Bria 2.0 User Guide - Manual (Page 16)

CounterPath Solutions, Inc.
12
Hiding your Identity
You can hide your identity on a call, so that the other person will not see your ID on their phone.
On the Call control bar, choose Options > Hide my Number for this Call. appears on the Call control bar for
this call. Place the call in the usual way.
You identity is hidden only for this call.
Which Account Is Used?
If you have more than one account enabled, Bria selects the account to use to place the call as follows:
• If a dial plan exists for any account, Bria runs through the dial plans to determine if the dialed number
matches any of these plans. If a match is found, the acount that the dial plan belongs to is used. See “Dialing
Plan” on page 71.
• If there is no match on any dial plans or if no dial plans are defined, then the default account is used.
When placing an outgoing call, you can explicitly specify the account to use for that call. Click the Account
Selection menu and select the desired account.
Once the call is placed, this menu always reverts back to “Auto”.
Ending a Call
Click End on the Call panel. Details of the call remain on the Call display. To clear the details of the call from
the display, click Clear.