CounterPath Bria 2.0 User Guide - Manual (Page 72)

CounterPath Solutions, Inc.
68
Enable session timers A session timer is a mechanism to detect whether a call session is still active
from the signaling point of view. When the timer expires, a refresh is sent from
one party to the other. The timer is then reset.
• Turn on to enable session timer. Enter a value in Default session time. The
factory setting is 60.
Turn off to disable session timer; refreshes will never be sent.
Session timer preference This field specifies your preference for which party should send the refresh. The
preference is not a guarantee that the refresh will be performed by the specified
party. The choices are:
• None: No preference.
• Local refreshes: Your computer sends.
• Remote refreshes: The other party sends.
• UAC refreshes: The user agent client (the party that initiated establishment of
the communications) sends.
UAS refreshes: The user agent server (the other party) sends.
Table 9: Account Properties – Advanced
Field Description