CounterPath Bria 2.0 User Guide - Manual (Page 71)

67
Account Properties – Advanced
s
Table 9: Account Properties – Advanced
Field Description
Reregister every The time interval between Bria’s attempts to reregister in order to refresh the
account registration with the VoIP service provider for this account. A value of
zero means not to reregister after the initial registration.
This value is placed in the “Expires” header field of the REGISTER message.
The factory setting is 3600.
Min. time If the reregistration fails, Bria will wait this amount of time, then attempt to
reregister. If the second attempt fails, Bria will wait twice this time and try again,
then four times this time, and so on, until reregistration succeeds.
The factory setting is 20.
Max. time This is the maximum wait time between attempts to reregister. Once this
maximum is reached, Bria will wait this time for all subsequent attempts.
For example, the min. time is 20 secs, the maximum time is 120 secs. Bria will
attempt to reregister as follows:
• Wait 20 secs.
• Attempt to connect.
• If fail, wait 40 secs.
• Attempt to connect.
• If fail, wait 80 secs.
• Attempt to connect.
• If fail, wait 120 secs (the maximum)
• Attempt to connect.
• If fail, wait 120 secs, and so on.
The factory setting is 1800.
Send SIP keep-alives Typically on, to instruct Bria to send SIP keep-alive messages in order to
maintain a “pinhole” through your firewall for SIP messaging.
Use rport Typically on.