CounterPath Bria 2.0 User Guide - Manual (Page 50)

CounterPath Solutions, Inc.
46
Field Description
Headset Mode
Speaker
Microphone
Change these fields only if you want to override the devices that Bria
automatically selected.
In both these fields, select the headset you are using.
The headset is the device that is usually used for audio out (the sound you hear)
and audio in (recording your voice). The only situation in which the headset is
not used is when the Speaker Phone button on the dialpad is pressed.
Therefore, unless you will always be using Bria in speakerphone mode, you
must make a selection here.
Select the headset in both the Speaker device field and Microphone device field.
Speakerphone Mode
Speaker Change this field only if you want to override the devices that Bria
automatically selected.
Make the appropriate choice:
• Select the device that you want to use for audio out (the sound you hear)
when the Speaker Phone button is pressed. Make sure you select a speaker
device (not the headset).
• Select None if you do not have a speaker phone. The Speaker Phone button
on the dialpad is disabled.
Microphone Change this field only if you want to override the devices that Bria
automatically selected.
Make the appropriate choice:
• Select the device that you want to use for audio in (recording your voice)
when the Speaker Phone button is pressed.
It can be any microphone: it does not have to be the microphone on the
device you specified as the speaker device. For example, it can be the
microphone on your camera.
• Select None if you do not have a speaker phone. The Speaker Phone button
on the dialpad is disabled.
Reduce background noise Automatically attempts to remove background noise.
Typically on for the speakerphone.
Phone Ring Device
Ring Device Change this field only if you want to override the devices that Bria
automatically selected.
The device where you want to hear the phone ringing: the headset, the
speakerphone, or none.
Ring volume The volume of the ringer.
Also ring PC speaker Click on or off, to suit your preference.
Camera
Camera Change this field only if you want to override the devices that Bria
automatically selected.
Select the camera model.