Despatch Protocol Manager with Protocol Plus - Manual (Page 11)

Protocol Manager Software E-100
7
Startup and Login
1. Start the application by clicking the Windows taskbar's Start button, then
clicking Programs from the menu that appears, then clicking the Protocol
Manager option from the list that appears.
a. NOTE: The very first time this is done, a prompt may appear that there is
no setup information yet, and that the password is despatch.
2. From the main screen that appears, select Login from the pulldown menu (or
double-click where it says (logged out) to log in. Note that an Operator ID
must be typed in, to log into the software. Type despatch into the Password
space. See Figure 6. NOTE that the Operator ID can be up to 16 characters
long.
Figure 6: User ID and Password Entry
When login is successful, the User ID will appear in the upper left corner of the
screen. NOTE that different operator levels have different colors behind the User
ID: Level 2 is black, Level 3 is green, and Level 4 is red. See Figure 7.