Despatch Protocol Manager with Protocol Plus - Manual (Page 29)

Protocol Manager Software E-100
25
Figure 23: MODBUS Comm Error Message
Note on Standby Mode
In the recipe editor screen, the Link to Profile
value “STBY” option (Standby mode)
can only be used with Protocol Plus controller version 4 or higher. If a recipe with the
Standby mode selected is chosen for download to an earlier version controller, a popup
message will be displayed by Protocol Manager, and the downloaded profile will set the
Link to Profile
value to the “HOLD” option for that controller.
Figure 24: Standby Mode Message
Creating a New Recipe
1. Pull down from the Windows/Recipe/Datalog position on the menu bar to
Recipe.
2. Press the NEW button.