Despatch Protocol Manager with Protocol Plus User Manual
Page 15
Protocol Manager Software E-100
11
Select the baud rate that corresponds to the rate programmed into the Protocol Plus
controller(s). 19.2 K is the default configuration. 38.4 K provides fastest
communication. If the controller(s) will not go on line, try a lower speed.
3.
Parity Option
None
Odd
Even
Select the parity that corresponds to that which is programmed into the Protocol
Plus controller(s).
4.
Use Long Timeout Delay checkbox
The software uses a timer to check Protocol controller response time. The software
calculates acceptable response time - especially critical when using multiple
controllers. If an unexpected communication failure occurs, checking this box will
increase the communication timeout period. NOTE: For normal operation, leave this
box unchecked: don't check this box unless a communication failure occurs.
5.
Press the Accept button to save the selected parameters. Press the Restore
button to return to the previously saved parameters.
NOTE that changes will not take effect until the Accept button is pressed.
6.
Click on the OK button to save settings.