Despatch Protocol Manager with Protocol Plus - Manual (Page 21)

Protocol Manager Software E-100
17
Values from 0 minutes to 60 minutes may be set in the Auto Logoff Time window,
which will automatically log the operator off the system after this predetermined period
of time. Setting this value to zero disables this feature and the system will not
automatically log off. Press the Accept button to save the selected parameters. Press
the Restore button to return to the previously saved parameters.
The 'Can Exit if Not Logged In' option can be checked to allow Protocol Manager to
be stopped at any time. If this option is left unchecked, Protocol Manager can only be
stopped if a user has successfully logged in at any level.
Exit the Setup Mode by clicking the close box or clicking the X box at the upper right-
hand corner of the Software Setup box.