Despatch Protocol Manager with Protocol Plus - Manual (Page 23)

Protocol Manager Software E-100
19
Controller Run Time Window
Figure 17: Controller Run Time Window
The Controller Run Time Window displays current status of an individual controller.
Parameters that may be displayed in the Controller Run Time Window are:
Controller Name and Address
Temperature Setpoint and Value
Alarms and Events Status
Cycle Complete and Buzzer Status
Operating Mode
Run/Stop/Hold Status
Controller Online/Offline Status
High Limit Setpoint and Value
Time Remaining in Timer Mode
Profile, Segment, and Time in Profile Mode
Operator ID
Lot Information
Recipes are started, run, and stopped from this window. This window may be used to
remotely control the controller's operating mode and state. If this window disappears,
click on the Network Summary window and double click on the controller name. If the