Despatch Protocol Manager with Protocol Plus - Manual (Page 16)

Protocol Manager Software E-100
12
Network Setup
1. The second tab from the left on the Software Setup window is the Network
tab. Select this tab to add controllers to the system. See Figure 11. Note that
if all the buttons are not active, click on the space below the Name to activate
the insert button.
Figure 11: Protocol Manager Setup - Network Tab
2. Use this screen to add as many controllers as are connected to the host PC.
Click on the first blank line to select it, then click the Insert button and press it
to add a new controller to the software. The Controller Setup window will
pop up. See Figure 12.