Despatch Protocol Manager with Protocol Plus - Manual (Page 32)

Protocol Manager Software E-100
28
Recipe Selection Setup
1. Go to the second tab from the left at the top of the Recipe Editor screen.
2. Click on this tab and the Recipe Selection screen will pop up. See Figure 26.
Figure 26: Recipe Selection Screen
The Selectable Recipe Files list indicates which recipes can be selected by name
when starting a profile run remotely. Recipes can be added to this list by clicking the
"Add" button and selecting a recipe from the list box that pops up. If a profile in the
selectable recipe files list is changed, the recipe will need to be deleted and re-added to
the list for changes to take effect.
Profiles can be started remotely by profile number only if the "Start Profile by Number"
option is chosen as shown above. If the "Start Profile by Recipe Name" option is
chosen in this window, starting a profile will require selection of a recipe, by name, from