EZWatch Pro 3.1 User Manual
Page 142
142
EzWebServer is now running. You
should be able to access your system
remotely via the web browser.
Step #8: How to setup Remote
desktop administration
or
the
EzRSever. This section will assist you
in setting up the EzRServer so that
you can have total control of your
camera server from a remote
location.
Click on Start, All Programs, EZWatch
Pro 3.1 H D , and click on “R em ote
Control Server – EzR S erver”. C heck
“A utorun EzR S erver” so that it w ill
start automatically when the PC
starts. (TCP/IP) Port: Leave this set
to the default port of 1901 Password:
Choose a password Click on ok to exit
and leave the program running.
Step #9 How to access your
camera system remotely using
EZNetwork 3.1 This section
will give you a brief overview of
how to use EZNetwork 3.1 to
view your cameras and to do
desktop administration. You
should be at a remote
computer or location for
these steps. Installation:
EZNetwork 3.1 can be found on
your EZWatch Pro installation
CD. You will need to install
this and the Access Runtime
“D atabase” com ponents on your rem ote PC for the softw are to function.
Once EZNetwork 3.1 has been successfully installed, you can click on the
icon on your desktop that says “R em ote-Viewer EZNetwork 3.1 to start the