EZWatch Pro 3.1 - Manual (Page 58)

58
4-1-2-3. Motion Setting
This setting is to trigger the DVR to start recording when objects are moving in a
specific area. To set this function, please click on the ―M otion settin g‖ tab from
the “C am era C onfiguration”. D V R provides user “S oftw are detection” and
“H ardw are detection” for security protection, to enable the “H ardw are diction”
function, the DVR requires installing the sensor card.
Before setting up detection, make sure that ―C am era configu ration ‖ 
―R ecordin g‖  ―Set u p S ch edule‖ has ―M otion detection recording‖
selected, and also the correct schedule selected, otherwise motion may not be
detected. Also, make sure that ―C am era configu ration ‖  ―R ecordin g‖ has
―Enable R ecordin g S chedu le” enabled. You can confirm that you’ve properly
set up the camera by inspecting the camera button number on the right toolbar –
it should now be greenish (waiting). It will turn red (recording) when motion is
detected.