EZWatch Pro 3.1 - Manual (Page 22)

22
install.
EZWatch Pro 3.1 HD is now installed. Now you can turn the computer off, unplug
the power cord from the back of the machine, and continue to the Video Board
Installation section.
Step 3: (board #CP-1416ASE or P-3416ASE)
3a. Insert the EZWatch Pro 3.1HD CD into
your CD-ROM drive, the EZWatch Pro 3.1HD
installer will appear automatically within 30
seconds listing all the available software.
Select "EZ Watch Pro 3.1HD 1416ASE /
3416ASE". If the EZWatch Pro 3.1 installer
does not appear on the screen automatically,
click "Start", then "Run" and execute
“d:\setup.exe” or w hatever drive letter
pertains to your CD-ROM drive.
3b. Now, the installer should have launched
for you, so click next to begin setup. You
should see the following screen asking you
where you would like to install EZWatch Pro
3.1HD. Click next if you would like to install in
the current location. In case you would like to
install into another location, click browse and
select the location that you would like to
install EZWatch Pro 3.1HD. You will see the
installer copying the EZWatch Pro 3.1HD files
to the location you selected. When finished
copying files, setup will ask if you want to restart your computer now or restart
later. C lick “N o I w ill restart m y com puter later” and click finished.
3c. Back to the AutoPlay Menu, click the one
labeled “Access Runtime(Database)” You
will now see the Data Access Objects (DAO)
Splash Screen, and on the welcome screen
click next to continue. On the Select
Components splash screen, you should see