EZWatch Pro 3.1 - Manual (Page 132)

132
Chapter 7 EZWatch IP How-To
7-1. How to remotely view security cameras
Introduction:
The ability to remotely view security cameras is one of the most useful
features of your EZWatch Pro system. It provides the ability to check on
your home or business with any computer or lap top which has an internet
connection. The remote viewing feature also allows you to remotely review
and download the recorded clips as well as view and control security
cameras.
The following is intended as a basic guide to help you understand what is
required to remotely view your security cameras through your EZWatch Pro
D V R /C am era S erver. For clarification, the term “D V R /C am era S erver” is
used to describe a computer which has the EZWatch Pro software installed
and the security cam eras connected to it. “D V R ” stands for D igital V ideo
Recorder. It is the main computer or server.
To accomplish remote viewing, the remote or off site PC uses the internet to
connect to the DVR. The DVR acts as the video server to feed the cameras
video to the remote PC.
On Site:
First, the security cameras should be connected to the EZWatch Pro DVR.
The DVR must be turned on and running the EZWatch Pro software. The
DVR must have an internet connection, preferably broad band (DSL or
Cable). The DVR will require a static IP address (provided by your internet
provider) or you can use our EZWatch IP service which eliminates the need
for a static IP address.