EZWatch Pro 3.1 - Manual (Page 54)

54
Step 1: In “N otify by:‖ section, please select ―E-M ail N otify‖
selection.
Step 2: Type the receiving email address in the ―M ail to:‖ section.
Step 3: Type the SMTP sever address for the DVR to send the e-mail
message.
Step 4: Type the sending e-mail address in ―M ail from :‖ section.
Step 5: Type the notifying word in ―S u bject:‖ and ―M essage:‖
section.
Step 6: Click the ―A dd‖ button and the setting information will be
saved and list in the below dialog box.
Step 7: Repeat step 2 to 6 to add another E-Mail notification.
 Enable trigger speed dome: This function is to set the connected
speed dome to move to the multiple preset positions when the
motion detection is triggered. User needs to install a speed dome to
be able to enable this function. About the speed dome installing detail
please refer to the speed dome controlling card user manual (e.g.