4. how to make a twist-on bnc video cable fitting – EZWatch Pro 3.1 User Manual
Page 145
145
The fist seven options are for ActiveX controls. Enable all Seven of them and
then click ok.
Now that you have demo.htm page fully displayed, you can click on
“connect to local site” This icon is the one the IE logo and computer. The
screen that pops up should look like the one here to the left. You can fill
out this box just like the one from EZNetwork 3.1. Click on connect once
you are finished. You should be able to select and view all of your cameras.
For Technical Support on any of the above, feel free to contact our
Seasoned Support Staff for any questions or concerns you may
have.
7-4. How to Make a Twist-on BNC Video Cable Fitting
The twelve and sixteen camera kits are shipped with twist on fittings so you
can easily make the correct lengths of cable you need. Follow the steps
below to properly prepare a video cable for the twist on BNC fittings.