EZWatch Pro 3.1 - Manual (Page 89)

89
To set up the DVR system display time clock.
 Display Modes
Provide different display mode to view all connected cameras easily.
 Display Modes Rotation 
Click to rotate the channels in split viewing mode automatically.
 Camera Display selection , , …
The channels selection buttons for “norm al live view ing ”, “schedule
prerecording ” and “recording the view im age ”
 P S A buttons (Optional)
PTZ camera control functions, user needs to install and configure the PTZ
camera and its controlling card to enable this function.
 ―P ‖ b u tton : To set the PTZ camera “Preset Position”, to set up this function
please follow the setup steps below.
Step 1: Blue circle in the icon and select a PTZ camera (e.g. ).
Step 2: Use the icon and click on or to adjust the
parameters.
Step 3: U se the icon’s direction arrows to adjust the camera aiming position.
Step 4: Press the “A” button and press “S top sw ivel”.
Step 5: Press the “P” button to enter the “Preset Position” setting interface.
Step 6: Type a location nam e and press the “S et” button, and click the “O K ”
button to complete.