1-8. view log – EZWatch Pro 3.1 User Manual
Page 81
81
Please rem em ber rem oving the default supervisor “root”, otherw ise there
will be two supervisors.
Set privilege for additional users
1.) Enter username and password, enter password again for
confirmation.
2.) Select privileges.
3.) Select cameras and authorize use by clicking on ―A uthorize‖.
4.) After completing the above steps, click ―A dd‖ to finish user setup.
5.) To add another user, please repeat 1 to 4 steps.
1.If the supervisors password or username is lost, EZWatch Pro must be
reinstalled. All previous settings will be lost but saved videos will not be
erased.
2 Passwords must consist of 0-9 and a-z or A-Z.
3.The password is case sensitive. (PaSsWoRd is not the same as password)
Remove/modify user privileges
1.) Select the user in the username list.
2.) Click ―D elete‖ to remove user or double-click on the username to
modify user privileges.
4-1-8. View Log
The EZWatch Pro will classify the logs by date and different events types. To
check the system logs simply click the
icon and the system will display the
window as showing below.