EZWatch TurboView DVR - Manual (Page 34)

34
 Click ( ) ▲, ▼ direction buttons on the right-hand side of HDD Damage frame to set the permissible level of HDD damage
(%). HDD is a very crucial element for DVR recording, so set the permissible level within 1% to 2% to assure maximum
safety.
-
While pressing (+) or (-) button on the rightmost side of Temperature or HDD Damage item, a target value increases or
decreases by 10 units.
 Choose ‘OK’ to confirm the setting.
4.2.3 Account
 Please click ( ) SYSTEM>Account and the following screen will appear.
 Please click ( ) New Group and the following screen will appear.
 Click ( ) keyboard icon on the right-hand side of Group Name frame. Then, the virtual keyboard will show. Please click ( )
desired characters (up to 8 characteristics) on the virtual keyboard.
 Do provisioning for Group Name by selectively checking  some of the following items (Setup, Search, Network, Archiving
and Shut Down).
 Choose ‘OK’ to confirm the setting.
 Please click ( ) Login Settings and the following screen will appear.
 Selectively enable password protection for important operations (Setup, Search, Network, Archiving and Shut Down).
 Please check  the operations that wish to enable password protection.
CAUTION
USER WILL NOT BE ASKED TO ENTER YOUR PASSWORD FOR OPERATION(S) WHERE PASSWORD PROTECTION IS NOT
ENABLED.
 Choose ‘OK’ to confirm the setting.
Login Setting
New Group