EZWatch TurboView DVR - Manual (Page 45)

45
 If a check box is checked  on Covert column, a video is recorded but is not displayed on the monitor.
 Click ( ) each frame on PTZ column to select PTZ protocols connected to a corresponding camera.
 Click ( ) each frame on Set to set PTZ Settings connected to a corresponding camera.
 If users click (Default), proper number of selected PTZ will appear automatically. Please choose ‘OK’ to confirm the setting.
 Menu, Tour and Pattern help user to use OSD function of PTZ camera.
- PTZ camera itself supports OSD menu, use the setup value to more easily enter and use the OSD menu even in DVR.
- If OSD enter command is 95 + PSET for example, designate 95 for Menu item,
- If shortcut key to use Tour function is 71 ~79 + PSET, designate 70 for Tour item and
- If shortcut key to use Pattern function is 81 ~ 89 + PSET, designate 80 for Pattern item.
- The setting information herein is used for PAN/TILT control in 5.1.5 (to be described).
- If click Default, basic setup values are given (i.e., Menu: 95, Tour: 70, Pattern: 80).
- For further details on setting, please refer to the PTZ camera manual.
 Click ( ) ▲, ▼ direction buttons on the right-hand side of the ID column to set ID number (i.e., 0 ~ 9999) of each PTZ.
 While pressing (+) or (-) button, ID increases or decreases by 10 units.
 Choose ‘OK’ to confirm the setting.
4.4.3 Audio
 Please click ( ) DEVICES>Audio and the following screen will appear.
 The Audio menu will allow user to choose whether to record Audio.
 When a check box is marked  on No column, corresponding audio and video are recorded. However, if the check box is
not marked, recording stops.
 Choose ‘OK’ to confirm the setting.
4.4.4 Alarm In
 Please click ( ) DEVICES>Alarm In and the following screen will appear.