EZWatch TurboView DVR - Manual (Page 50)

50
 There are three kinds of recording mode.
- Continuous: record continuously.
- Event: record only when Sensor or Motion calls.
- Emergency: record when press EMERGENCY key.
 The Continuous menu will allow user to set recording mode.
 Each frame on Title column shows camera title registered in DEVICES>Camera/PTZ. User cannot change camera titles
here.
 Click ( ) each frame on Resolution column to select recording resolution of a corresponding camera. User may select its
resolution from 360x 240(288), 720x240(288), 720x480(576), 1280x720 and 1920x1080.
 Click ( ) each frame on Frames column to select recording rate of a corresponding camera. Recording rate varies by
camera. Below lists the maximum recording rate of each camera.
360x 240(288) 720x240(288) 720x480(576) 1280 x 720 1920 x 1080
4 Channel DVR 120(100) 120(100) 120(100) 120(100) 120(100)
 Click ( ) each frame on Quality column to select recording quality of a corresponding camera. User may select its recording
quality from Super, High and Std.
 User may change the setting values of Resolution, Frames, and Quality at a time by clicking the menu tab.
 Choose ‘OK’ to confirm the setting.
 Please click ( ) Event and the following screen will appear.
 The Event menu will allow user to set Event videos.
 Each frame on Title column shows camera title registered in DEVICES>Camera/PTZ. User cannot change camera titles
here.
 Click ( ) each frame on Resolution column to select recording resolution of a corresponding camera. User may select its
resolution from 360x 240(288), 720x240(288), 720x480(576), 1280x720 and 1920x1080.
 Click ( ) each frame on Frames column to select recording rate of a corresponding camera. Recording rate varies by
camera. Below lists the maximum recording rate of each camera.
360x 240(288) 720x240(288) 720x480(576) 1280 x 720 1920 x 1080
Event
Continuous