EZWatch TurboView DVR - Manual (Page 58)

58
4.6.4 System Event
 Please click ( ) LINK>System Event and the following screen will appear.
 Select recording cameras and alarm outputs while Emergency recording using EMERGENCY key and set E-mail addresses
for notification.
 Link Notification displays E-mail addresses registered in DEVICES>Network>Notification.
 Please follow the setup procedures below.
① System Event frame displays Emergency, which user does not have to change.
② Select cameras for recording when emergency occurs. Please check  a check box under Link Camera. More than two
cameras can be set.
③ Select alarm outputs to be worked when emergency occurs. Please check  a check box under Link Alarm Out. More
than two alarm outputs can be set.
④ Select E-mail addresses for notification when emergency occurs. Please check  a check box under Link Notification.
More than two E-mail addresses can be set.
 Choose ‘OK’ to confirm the setting.
4.6.5 Popup Link
 Please click ( ) LINK>Popup Link and the following screen will appear.
 When Motion or Alarm-In is detected, user can select a popup or beep sound for warning, or have a particular channel of
interest to pop-up on Spot Screen.
 Please follow the setup procedures below.
① Select camera
② Popup: Please Check  a check box under making the popup screen for main monitor.
③ Beep: Please Check  a check box under making beep sound.
④ Spot: Please Check  a check box under making the popup screen for spot monitor.
 Click Copy to All Cameras button, then the present channel setup will apply to all other cameras.
 Choose ‘OK’ to confirm the setting.