EZWatch TurboView DVR - Manual (Page 52)

52
When the HD-SDI input changed manually, DVR will start restart to apply changed resolution.
CAUTION
ALTHOUGH USERS TURN ITS SYSTEM SETTING TO DEFAULT, THE ANALOG OUTPUT WILL STAY PREVIOUS OUTPUT METHOD
AND NOT EFFECT BY THE DEFAULT SETTING.
4.5.2 Schedule
 Please click ( ) RECORD>Schedule.
 Each weekday is composed of 24 ‘Time blocks’. Each block represent 1 hour.
 Click ( ) Camera frame to select Camera No. 1.
 Please set the recording mode as follows:
① Mark a check box the desired recording mode in the schedule (i.e., Continuous, Alarm, Motion and PreAlarm)). If user
wants to stop recording, please clear all check boxes.
② Click block, row, column or all (square box) to register desired recording mode.
- Click ( ) a block and only the block will be registered.
- Click ( ) a row (S~H) and the entire row will be registered.
- Click ( ) a column (00~23) and the entire column will be registered.
- Click ( ) a square box (top-left side between ‘S’ and ‘00’) and all the rows/columns will be registered.
 Repeat the procedure for Camera Nos. 2 to 16. If user wants every camera to have the same mode, please click ( ) Copy
to All Camera.
 Below lists symbols of the respective recording modes.
Continuous
Alarm In
Alarm In / Continuous
Alarm In / PreAlarm
Motion