EZWatch TurboView DVR - Manual (Page 56)

56
 The LINK menu will allow user to set recording modes of all kinds of alarms (Sensor, Motion Event, Video loss, System
Event, etc.), alarm output, e-mail notification and the like.
4.6.1 Alarm In
 Please click ( ) LINK>Alarm In and the following screen will appear.
 Select cameras for recording while the motion sensor is in operation and alarm outputs and set up E-mail addresses for
notification.
 Link Notification displays E-mail addresses registered in DEVICES>Network>Notification.
 Please follow the setup procedures below.
① Click ( ) Alarm In frame and select Alarm In 1.
② Select cameras for recording when Alarm In 1 is on. Please check  a check box under Link Camera. More than two
cameras can be set.
③ Select alarm outputs to be worked when Alarm In 1 is on. Please check  a check box under Link Alarm Out. More than
two alarm outputs can be set.
④ Select E-mail addresses for notification when Alarm In 1 is on. Please check  a check box under Link Notification. More
than two E-mail addresses can be set.
⑤ Repeat the above procedure for Alarm In 2~ Alarm In 16 (Up to 2 for A Type / UP to 4 for B Type / Up to 16 for C, D, E
and F Type).
 Choose ‘OK’ to confirm the setting.
4.6.2 Motion Event
 Please click ( ) LINK>Motion Event and the following screen will appear.