EZWatch TurboView DVR - Manual (Page 44)

44
CAUTION
CHANGES BEING MADE ARE APPLIED AFTER COMPLETE SETUP TO EXIT.
CAUTION
ONCE PORT NUMBERS ARE CHANGED, IT MUST BE CHANGED THE PORT NUMBERS OF CMS (Central Monitoring Station)
PROGRAM AS WELL.
 Choose ‘OK’ to confirm the setting.
 Please click ( ) Notification and the following screen will appear.
 The Notification menu will allow user to set transmission of Event occurred in DVR via E-Mail.
 Click ( ) the keyboard icon on the right-hand side of Add E-Mail item then the virtual keyboard will appear. Please register
E-Mail address. E-Mail address should contain @.
 When an event occurs, user can send an email to a designated mail address by clicking Attach button and selecting Data to
be transmitted. User may select one of JPEG, VIDEO CLIP, None modes. In case of transmitting VIDEO CLIP Data, set the
duration of time for recoded images in Duration item (e.g., 1 sec, 3 sec, 5 sec).
CAUTION
DEPENDING ON THE VARIOUS LOCAL CONDITIONS, SOME e-MAIL SERVERES MAY NOT WORK PROPERLY WITH THIS FUNCTION.
4.4.2 Camera / PTZ
 Please click ( ) DEVICES>Camera/PTZ and the following screen will appear.
 Click ( ) the keyboard icon on the right-hand side of each frame on Title column and the virtual keyboard will appear. Then,
register titles of cameras.
 If a check box is checked on No column, a video of the corresponding camera is recorded and displayed on the monitor.
However, if user does not check the checkbox, both recording and monitor display stop. Then, DVR picture, instead of a
recorded video, will be displayed on the monitor.
CAUTION
WHEN USER EXCLUDES A CORRESPONDING CAMERA VIDEO FROM RECORDING AND MONITOR DISPLAY (CHECK A CHECK BOX
 ), MAKE SURE CHANNELS OF LARGE NUMBERS ARE EXCLUDED FIRST.
Notification