EZWatch TurboView DVR - Manual (Page 40)

40
 The Multi Spot menu will allow user to adjust channel sequencing interval of Spot monitor.
 Adjust interval for ‘Full screen sequencing’.
 Check  check box next to the camera that wish to include in sequencing. Any camera with unchecked check box will be
excluded from channel sequencing.
 Adjust the rotation interval of camera by clicking Dwell column. The rotation interval changes to 3>5>10>15>30>60 seconds
by each press.
 Use only with 8 / 16 channel DVRs.
 Adjust interval for ‘X4 Split Screen sequencing’.
 Check  check box next to the camera that wish to include in sequencing. Any camera with unchecked check box will be
excluded from channel sequencing.
 Adjust the rotation interval of camera by clicking Dwell column. The rotation interval changes to 3>5>10>15>30>60 seconds
by each press.
 ‘4 Split Screen sequencing’ is disabled in the following modes.
- 8 channel DVR: 3x3 Mode
- 16 channel DVR: 4x4 Mode
 Use only with 16 channel DVR.
 Adjust interval for ‘X9 Split Screen sequencing’.
 Check  check box next to the camera that wish to include in sequencing. Any camera with unchecked check box will be
excluded from channel sequencing.
 Adjust the rotation interval of camera by clicking Dwell column. The rotation interval changes to 3>5>10>15>30>60 seconds
by each press.
 ‘9 Split Screen sequencing’ is disabled in 4X4 Mode.
4.3.6 VGA (D, E and F Type)
 Users are able to set its video output resolution from 1024x768 to 1920x1080
 If user wishes to hear audio via HDMI cable, check the box HD Audio Output
X9 Seq
Quad Seq
Full Seq