Garland HO IN 1500 INDUCTION TEMPERATURE CONTROLLED BUILT-IN HOLD-LINE - Manual (Page 11)

Installation RTCSmp Built-In Temperature Controlled Hold-Line
Part # 4532288 Rev 3 (6/11/14) 11
4.4 Heat Retaining Plate Installation
4.4.1 Dimensions: RTCSmp HOIN1500 Induction Heat Retaining Plate
(measurements in mm and [inch])
4.4.2 Cut-Out Dimensions and Clearance
The RTCSmp HO/IN unit is to be flush-mounted. A support frame or support structure has to be custom
designed and built for housing the unit.
A. Cut-out dimension on the counter surface:
408 x 808mm [16.06” x 31.81”]
NOTE: Dimensions include widths for silicone
joints on all four (4) sides. Consider adjusting cut-
out dimensions based on mounting methods, see
4.4.3 Parallel Installation.
B. Recommended recess depth: 8mm [0.32”]
C. Body clearance (height x depth x width):
6.30” x 14.96” x 30.71” / 160 x 380 x 780mm
800 [31.50]
800 [31.50]
772 [30.39]
400 [15.75]
372 [14.65]
400 [15.75]
114 [4.49]
14
[0.55]
7.5 [0.30]
52
[2.05]
65
[2.56]
152 [5.98] 57 [2.24]
110 [4.33]
200 [7.87]
90 [3.54] 100 [3.94]
100 [3.94]
200 [7.87]
counter
surface
A
B
C