GeoDesy GD-Geo20 - Manual (Page 15)

15
6 Device Operation
6.1 Web Management Structure
The main web management menu is displayed after successfully login into the system (see the figure
below). From this menu all essential configuration pages are accessed. The active menu tab is
displayed in a different color:
Figure 7 – Main Web Management Menu
By default the Status | Information menu is activated where the main device information is displayed.
The AP web management menu has the following structure:
Status
Information
– displays general information of the device.
Network
– displays main network and wireless statistics of the device.
Wireless
– displays information about connected stations on the particular interface (only on
Station wireless mode).
Routes
– displays unit’s route table.
ARP
– displays ARP table.
Configuration
Network
– network mode, Ethernet speed, IP settings, management and data VLANs, DHCP,
PPPoE.
Wireless
– specify wireless mode (AP, Station, iPoll AP, iPoll Station), country, SSID, IEEE
Mode, channel configuration, security, advanced radio settings.
Virtual AP
– create and setup virtual AP (only in AP wireless mode).
Wireless ACL
– access control by MAC address (only in AP and IPoll AP wireless modes).
Traffic shaping – download and upload traffic control.
Port forwarding
– port forwarding rules (only in router network mode for AP and IPoll AP).
Static routes
– static route rules (only in router network mode for AP and IPoll AP).
GD-GEO20