GeoDesy GD-Geo20 - Manual (Page 55)

55
WISPr Settings
WISPr location name
– specify the WISPr location name.
Operator name
– specify the operator‟s name
Network name
– specify the network name
ISO country code
– specify the country code in ISO standard.
E.164 country code
– specify the country code in E.164 standard.
E.164 area code
– specify the area code in E.164 standard.
WISPr default max bandwidth
– specify the default bandwidth limitation for clients. Note that if the
External RADIUS server has traffic limitations preconfigured, and then RADIUS overrides these settings.
Download, kbps
– specify max download bandwidth in kbps.
Upload, kbps
– specify the max upload bandwidth in kbps.
Interface IP address
– specify the LAN interface IP address. Note that LAN settings on Network
Menu will be disabled if UAM is enabled.
DHCP settings
– specify the dynamic IP settings for the connected users:
Network
– specify the network for IP address pool.
Subnet mask
– specify the subnet mask for the DHCP.
DNS server
– specify the primary and the secondary DNS servers.
Data encryption settings
– choose the data encryption method:
 Open – no encryption.
 Personal WPA – preshared key encryption with WPA using AES method.
 Personal WPA 2 – preshared key encryption with WPA2 using AES method.
8.2.1 White/Black List
The white and black access lists control user access to W eb content through the APC. The
unauthenticated users will be allowed to access sites from white list while access to the sites from black
list will be denied even for authenticated users.
Use “+” sign to add new entry to the list, and “–” sign to remove required one.
White list
Host/IP address
– specify the IP addresses or hosts for free access even for unauthenticated users.
Notes
– add a description for the specified host or IP address.
Black list
Host/IP address
– specify the IP addresses or hosts that will be not accessible even for the
authenticated users.
Notes
– a description for the specified host or IP address.