GeoDesy GD-Geo20 - Manual (Page 26)

26
Depending on the wireless operation mode selection some of the displayed configuration parameters
will differ (e.g. security or advanced wireless settings).
Wireless mode
– select wireless operation mode:
 Access Point (auto WDS)) – enables the APC radio function as an access point. When in AP
mode, wireless clients can see the AP broadcast and associate to it if settings are configured
correctly.
 Station – sets the radio to run in client mode. In this mode wireless station does not broadcast an
SSID and clients cannot connect to it. Station mode allows the APC radio to connect to other
radios functioning as an AP.
 Station WDS – a wireless station will communicate with access point in WDS mode. Station WDS
Mode enables packet forwarding at layer 2 level.
 iPoll Access Point – enables APC radio function as access point for point-to-multipoint solution.
The iPoll Access Point accepts only iPoll Station requests.
 iPoll Station – enables APC radio function as wireless station for point-to-multipoint solution. The
iPoll Station can establish a link only with iPoll Access point.
Be sure that both ends of the link have the appropriate wireless mode, otherwise the
connection will be not established (e.g. iPoll Station is able to establish a connection only with
iPoll AP).
Country
– choose from the drop-down list the country in which the APC will operate. The channel list,
transmit power limits, IEEE 802.11 mode will be adjusted according to the regulations of the selected
country.