GeoDesy GD-Geo20 - Manual (Page 58)

58
Attribute Description
Acct-Interim-Interval (85) If present in Access-Accept chilli will generate interim accounting
records with the specified interval (seconds).
MS-MPPE-Send-Key (311,16) Used for WPA
MS-MPPE-Recv-Key (311,17) Used for WPA
9.2.2 WISPr Attributes
Attribute Description
WISPr-Location-ID (14122, 1) Location ID is set to the radiuslocationid option if present.
Should
be in the format: isocc=,
cc≤E.164_Country_Code>, ac≤E.164_Area_Code>,
network≤ssid/ZONE>
WISPr-Location-Name (14122, 2) Location Name is set to the radiuslocationname option if
present. Should be in the format: ,
WISPr-Logoff-URL (14122, 3) Included in Access-Request to notify the operator of the
log off URL. Defaults to " http://uamlisten:uamport/logoff".
WISPr-Redirection-URL (14122, 4) If present the client will be redirected to this URL once
authenticated.
This URL should include a link to WISPr-Logoff-URL in
order to enable the client to log off.
WISPr-Bandwidth-Max-Up (14122, 7) Maximum transmit rate (b/s). Limits the bandwidth of the
connection.
Note that this attribute is specified in bits per second.
WISPr-Bandwidth-Max-Down (14122, 8) Maximum receive rate (b/s). Limits the bandwidth of the
connection.
Note that this attribute is specified in bits per second.
WISPr-Session-Terminate-Time (14122, 9) The time when the user should be disconnected in ISO
8601 format (YYYY-MM-DDThh:mm:ssTZD).
If TZD is not specified local time is assumed.
For example a disconnect on 18 December 2001 at 7:00
PM UTC would be specified as 2001-12-
18T19:00:00+00:00.
9.2.3 ChilliSpot Attributes
Attribute Description
ChilliSpot-Max-Input-Octets (14559, 1) Maximum number of octets the user is allowed to transmit.
After this limit has been reached the user will be
disconnected.
ChilliSpot-Max-Output-Octets (14559, 2) Maximum number of octets the user is allowed to receive.
After this limit has been reached the user will be
disconnected.
ChilliSpot-Max-Total-Octets (14559, 3) Maximum total octets the user is allowed to send or
receive.
After this limit has been reached the user will be
disconnected.
ChilliSpot-Bandwidth-Max-Up (14559, 4) Maximum bandwidth up