Status network, Wireless, 2 status network – GeoDesy GD-Geo20 User Manual

Page 18: 3 wireless

Advertising
background image

18

7.1.2 Status Network

The Network sections displays statistics of the network interfaces and DHCP leases (depending on
network mode):

Figure 9

– Network Statistics

Interface

– displays the interface name. The SSID name is displayed in the brackets near the radio

interface (and VAPs).

IP address

– displays the IP address of the particular interface.

MAC

– displays the MAC address of the particular interface.

Received

– displays the number of received packets.

RX errors

– displays the number of the RX errors.

Transmitted

– displays the number of transmitted packets.

TX errors

– displays the number of the TX errors.

DHCP leases

– table displays information about leased DHCP addresses.


7.1.3 Wireless

Status Wireless section is not available if APC is operating in Station wireless mode. All necessary
information about wireless connection with AP unit is under

Information

section.

The Wireless statistics displays the receive/transmit statistics of successfully associated wireless
clients:

Advertising