GeoDesy GD-Geo20 - Manual (Page 45)

45
7.4 System
7.4.1 Administration
For security reasons it is recommended to change the default administrator username and
password as soon as possible.
System menu allows you to manage main system settings and perform main system actions (reboot,
restore configuration, etc.). The section is divided into further three sections: Device settings, Account
settings and system functions.
Device settings
Friendly name
– specify name of the APC that will be used to identify the unit.
Device location
– describe the location of the device [maximum 255 ASCII characters].
Longitude
– specify the longitude coordinates of the device [specific decimal format, e.q. 54.869446].
Latitude
– specify the latitude coordinates of the device [specific decimal format, e.q. 23.891058]. Both
coordinates helps indicate accurate location of the device.
Account settings
The Administrative Account menu is for changing the administrator’s password.
Default administrator logon settings are:
Username: admin
Password: admin01
Username
– change the administrator’s username.
Old password
– enter the old administrator password.
New password
– enter the new administrator password for user authentication.
Verify password
– re-enter the new password to verify its accuracy.
The only way to gain access to the web management if you forget the administrator
password is to reset the unit to factory default settings.