HYDAC HMG 3010 - Manual (Page 11)

HMG 3010 Page 11
Edition 11/2011 - V04 R01 Part No.: 669855
4.3 Switching on the instrument
When starting the unit up for the first time the
Welcome start-up screen appears. Select
your language using the 5-way navigation key
(select or checkmark your option by pressing
OK) and set the date and time. Select the de-
sired format, and then enter the current date
and time via the keypad. Save your entries by
pressing OK, followed by Next.
The following appears in the display when
starting the unit up in normal operation:
• Manufacturer
• Designation of the instrument
• HMG
version
• Date and time
• Battery charge status
The screen switches to measured value
display mode in a few seconds. If sensors
are already connected, the current meas-
ured values are shown in the Current
Measured Values menu (see title bar at
top of display). To skip through the start-
up screen more quickly and proceed di-
rectly to the measured values menu, press
Esc or OK.
The following is listed in the measured values
screen (see screenshot): Input channel – Des-
ignation – Value – Unit (of measurement)
The menu bar at the bottom of the screen
(function bar) displays the main menu and
next to that, on the right, the battery charge
status. The main menu contains the follow-
ing functions which you can access using
the navigation key (arrow key) plus the OK
key.
Settings — for entering or retrieving set-
ting data used for performing measure-
ments
Recording — for recording a measure-
ment and graphically rendering meas-
urement data, e.g. as a curve
Note:
As a rule, functions which can be
selected and executed are in
blue .
Functions which can’t be se-
lected or altered are in Black.
Warnings appear in red
when input data is incorrect.