HYDAC HMG 3010 - Manual (Page 15)

HMG 3010 Page 15
Edition 11/2011 - V04 R01 Part No.: 669855
The HMG now shows the measured values
in the 7-segment display panes. Depending
on the setting, the Min/Max values are
shown in addition to the current measured
values.
The Recording menu is used for recording
measurement curves. During recording, the
measured values are recorded for a certain
period of time, stored and then shown as a
graph.
Example of Recording a Measurement
Curve:
The function bar of the Actual Measured
Values menu contains the item Recording.
Select it using the 5-way navigation key, fol-
lowed by OK. In the Recording menu that
follows, select Start recording and confirm
with OK.
In the menu that follows, Start Recording,
you are shown the default settings for re-
cording a measurement curve. In our exam-
ple, we want to generate a Simple meas-
urement curve with two sensors at chan-
nels A and B with a sampling rate of 1 ms
and a Recording time of 30 s. Then meas-
urement is to be finished.
Simple measurement curve is already set
in the menu. For the other settings, proceed
as follows:
Using the arrow keys of the 5-way navigation
key, select the third item, Sampling rate. OK
opens up a drop-down list where you select
a sampling rate of 1 ms, confirm with OK.
This takes you automatically to the Re-
cording time line. Press OK. Scroll down
the list using the arrow keys to 30 seconds,
and confirm with OK.