HYDAC HMG 3010 - Manual (Page 16)

HMG 3010 Page 16
Edition 11/2011 - V04 R01 Part No.: 669855
In the Recording option line, select End
when time has elapsed in the same man-
ner.
In the Automatic operation line, select the
Deactivated option and in the Magnified
section the 5 second option.
Your display now shows the settings you
made for recording measured values (see
screenshot). To double-check your settings,
refer to the recorded data selected by you
above the function bar.
Now you can start recording by pressing
Start in the function bar + OK. A progress
bar shows you the status of your measure-
ment. The function bar offers you the option
of having the measurement curve plotted or
the actual value shown while recording.