HYDAC HMG 3010 - Manual (Page 43)

HMG 3010 Page 43
Edition 11/2011 - V04 R01 Part No.: 669855
Before doing this, you can have the meas-
urement shown again as a curve (Graph +
OK) or as a measured value table
(Table + OK).
When doing this, other tools are offered for
analyzing the chart or table. For more infor-
mation on how you can retrieve recordings
and view them as a curve or table, please
refer to Viewing Recordings.
Back/Esc enables you to return to the
Simple Curve Recording – Status screen.
To save the recording, select Save and con-
firm with OK. The HMG automatically as-
signs a name and a consecutive number,
both of which can be subsequently changed
by you. Select the appropriate item + OK
and make your entries using the combination
keypad.
The Comment item enables you to enter
text, e.g. a description indicating the opera-
tional status of the unit or facility while the
recording was being made.
To save the recording, select Save and con-
firm with OK. The HMG saves the measure-
ment settings together with each recording
so that a detailed measurement log is cre-
ated.
Generally speaking, the following applies:
Each measurement is given a number.
The HMG automatically assigns the next
highest unused consecutive number, which
is always unique. Any gaps in the list of
numbers are not filled.