HYDAC HMG 3010 - Manual (Page 50)

HMG 3010 Page 50
Edition 11/2011 - V04 R01 Part No.: 669855
As soon as you confirm this with OK, meas-
urement is activated, resulting in the screen
shown on the left. Selecting Graph means a
measurement curve is plotted and displayed
(cf. top screenshot), selecting Measured
values takes you to the normal measured
values screen (cf. bottom screenshot). If you
like, you can switch back and forth between
the Status, Graph and Measured values
screens.
You can manually end the recording cur-
rently in progress at any time by selecting
Stop. This cancels the current measurement
and activates a new measurement automati-
cally. To end automatic measurement, select
Autostop followed by OK.
After ending automatic measurement the
result obtained is a series of measurements,
which can be viewed as a list via View re-
cording. To do this, select View recording
in the Recording menu; you are now shown
all of the measurement curves just recorded.
Select one of the recordings using the arrow
keys. A short overview of the recorded data
appears above the function bar for the re-
cording selected.
The recording can be displayed as a graph
or a table via the relevant options in the func-
tion bar. For more details on this, please
refer to section Viewing Recordings.