HYDAC HMG 3010 - Manual (Page 68)

HMG 3010 Page 68
Edition 11/2011 - V04 R01 Part No.: 669855
6.3 Extras Menu
The following options are available to you
in the function bar of the Extras menu:
• Stopwatch
• About HMG 3010.
The stopwatch offers you the following
functions: Start, Stop, Interim reading
and Reset.
• SMART sensors
• Update Instrument Software.
(only after downloading new firmware)
Stopwatch
To record the time you needed to trouble-
shoot an error (locate it), you can start the
stopwatch. Use Back or Esc to switch
back to normal measurement mode. The
stopwatch continues to run in the back-
ground. As soon as you have completed
troubleshooting, call up the Stopwatch
menu again and stop the clock using the
Stop command.
Use Reset to set the stopwatch back to
zero.
About HMG 3010
The About HMG 3010 menu provides an
overview of available power supply, how
much memory is still free, when the Min
and Max values were reset last, and the
address of HYDAC ELECTRONIC.
SMART sensors
Measured values (SMART sensors)
The menu points SMART sensors and
Measured values (SMART sensors) are
described in more detail in the next section
(6.4).