INFICON Stripe CDG100Dhs 0.1 ... 1000Torr / mbar - Manual (Page 23)

tina95e1 (2014-07) 23
3.2.3 Mini USB Type B Connector (Diagnostic Port)
A standard USB cable can be used. If no cable is available,
make one according to the following diagram. Connect the cable.
5 1
Mini USB typ B, soldering side
Pin 1
VBUS (5 V)
Pin 2 D-
Pin 3 D+
Pin 4 ID
Pin 5 GND
Mini USB type B