7 diagnostic port (usb interface) – INFICON Stripe CDG100Dhs 0.1 ... 1000Torr / mbar User Manual
Page 36
Advertising
36
tina95e1 (2014-07)
Loading of the default parameters is irreversible.
Loading the default parameters:
Put the gauge out of operation.
Keep the <ZERO> button depressed for at least 5 s while
the gauge is being put into operation (Power ON).
4.7
Diagnostic Port (USB Interface)
The diagnostic port <DIAG> permits to output the pressure
reading and all status information and to enter all settings at the
same time (
→ [4]). A standard USB cable type A/mini B can
be used.
Required software: T-Gauge. Please contact your local INFICON
service center.
Mini USB type B
Advertising