INFICON Stripe CDG100Dhs 0.1 ... 1000Torr / mbar User Manual
Page 32
Advertising
32
tina95e1 (2014-07)
max. ø1.1 mm
Press the button
For changing the threshold value, push the <ZERO> button
and keep it depressed. The threshold keeps changing from
the current value (ramp) until the button is released or until
the limit of the setting range is reached.
max. ø1.1 mm
Keep the button
depressed
Push the <ZERO> button again:
Fine adjustment
within 0...3 s:
the zero adjustment value changes
by one unit
Change of direction
within 3...5 s:
the zero adjustment changes its
direction (the blinking frequency of
the <STATUS> LED changes
briefly)
Advertising