INFICON BPG400 ATM to Ultra-High Vacuum Gauge - Manual (Page 17)

tina03e1-b (2004-02) BPG400 v1.om
17
Slide the electronics unit (2) in to the mechanical stop (be careful to cor-
rectly align the pins and notch (4a)).
Secure the electronics unit (2) with the hex socket set screw (1) using an
Allen key, size 2.5 mm.
The extension is now installed.
In severely contaminating processes and to protect measurement electrodes opti-
cally against light and fast charged particles, replacement of the built-in grid by the
optional baffle (
→ 52) is recommended.
The optional baffle will be installed/deinstalled at the sensor opening of the dein-
stalled gauge (Deinstallation gauge
→ 46).
Caution
Caution: dirt sensitive area
Touching the product or parts thereof with bare hands increases the
desorption rate.
Always wear clean, lint-free gloves and use clean tools when working
in this area.
• Baffle (→ 52)
• Pointed tweezers
• Pin (e.g. pencil)
• Screwdriver No 1
Carefully remove the grid with tweezers.
3.1.3 Using the Optional Baffle
Installing/deinstalling
the baffle
Required tools / material
Installation