JUMO 902940 DELOS T Electronic Temperature Switch with Display and Analog Output Operating Manual - Manual (Page 67)

67
7 Setup program
7.1 General information about the setup program
The setup program optionally available permits a comfortable and clearly structured setting of
the large number of device parameters. Settings made once can be saved on a data carrier as
a file and transmitted one to one to several devices.
Configurable parameters
Depending on the device, it is possible to set, for example:
•
Measuring range and range limits
• Output behavior in the event of an overrange or underrange
• Functions of the K1 and K2 switching outputs
 Chapter 3 "Electrical connection", page 21
Connection
TIP!
For configuration, the device must be connected to the power supply.
(1) Rated voltage supply DC 24 V (2) Device
(3) USB/TTL converter
included in VARTN 70/00456352 (4) Notebook/PC
(a) Cable box 4-pin (straight) M 12x1
with PVC connection cable length 2000 mm
VARTN 40/00404585 or
Cable box 4-pin (angled) M 12x1
with PVC connection cable length 2000 mm
VARTN 40/00409334 (b) Connection cable (Y cable)
VARTN 70/00507861
(c) PC interface cable (gray)
Part of (3)