JUMO 902940 DELOS T Electronic Temperature Switch with Display and Analog Output Operating Manual - Manual (Page 8)

1 Introduction
8
1.2 General information
• The device measures the temperature in liquids and gases.
• The temperature is displayed digital.
• Depending on the version, the following outputs are available:
- 1x PNP switching output
- 2x PNP switching outputs
- 1x PNP switching output and 1x analog output 0 to 20 mA, configurable
- 1x PNP switching output and 1x analog output 4 to 20 mA, configurable
- 1x PNP switching output and 1x analog output 0 to 10 V, configurable
• The device is also available in a version for use in increased medium temperatures.
• The device is additionally available in a version equipped with M 12x1 connection for RTD
temperature probes.
• The device can be set directly on site or configured via the setup program with a notebook/
PC.
(1) Locking screw for operation
CAUTION!
The protection class specified for the device is only achieved when the locking screw is insert-
ed and tightened.